ProParts Direct

Quick Start-up ... lawn mower and leaf blower

Are you getting the most out of your new lawn mower or trimmer? Newer outdoor power equipment is designed to start easily and in fewer steps than years past. In fact, many new mowers and snow blowers have an optional electric start to make the process stress free.
Starting a Stihl BG 55 Blower

Starting a Toro Lawn Mower

As always, please refer to your owner's manual for safety requirements and specific questions. Do you have a power equipment question that you would like us to answer? Join the conversation and let us know! 

3 Easy Steps to Replacing Your Pressure Washer pump

How to Replace Your Homelite Pressure Washer Pump
1. Remove the Bolts: Locate the bolts that hold the engine and pressure washer pump together at the base of the engine. There should be (3) bolts. Remove those bolts.
2. Transfer The Thermal Release Valve:
Remove the Thermal Release valve from the old pump with a wrench. Before re-installing make sure you wrap the threads with some kind of thread tape or sealant.
3. Mount the New Pump: Place the pump on the engine shaft. Rotate the pump until you get the keyway to line up with the key on the engine shaft. Install all (3) bolts and tighten.
Installing a new pressure pump is easy to do and can save you some money if you repair this yourself. Alot of times these manufactures do not offer repair parts and in this case installing a new pump is cheaper than repairing the old one. To replace your Homelite Pressure Washer Pump Click here to purchase a new one. A Quick repair will have you up and cleaning in no time!

Mower Maintenance Checklist

July is the perfect time to give your lawn mower a check-up. We outline the 6 steps to ensure your mower is running and grass is cut.

  • Sharpen the blades! Sharpening at the beginning of the season is NOT enough! For most homeowners, sharpening or replacing the blades monthly is a good habit. A dull blade will cause excessive wear on the mower and leave the lawn vulnerable to disease. 
  • Clean the deck. Over the last few months, wet grass has been accumulating and drying on the mower deck. If the mower is too clogged to throw the grass as it cuts, it’s going to create problems for the lawn and machine. 
  • Replace your air filter. Do NOT use compressed air to “clean” a filter – this only causes tears in the filter that allow dirt into the engine. A small engine air filter is short money compared to a replacement engine.
  • Check the oil. Your owner’s manual will specify how often the engine needs an oil change.  If you can’t recall the last time the oil was changed or debris can be seen in the oil, it’s time to change the oil.
  • Check the wheels! On a push mower, make sure all 4 are set at the same height. For riding mowers, ensure all are properly inflated for a nice, level cut. 
  • Blow off dust, grass, and other debris. If you own a handheld leaf blower, you’re in luck – it’s the perfect tool to quickly clear areas around the deck, belts, and controls. Plus, if storing in a garage, it’s an easy way to keep things inside clean.
While performing mid-season maintenance it's important to consult your lawn mower's owner manual. The manual will provide a maintenance schedule, replacement part numbers, and all the required steps. 

Snow Blower Storage: You Have One Job

If the winter of 2014/15 forced you into a new snowblower, take a few moments to properly store it and protect your investment! The most common repair problems are easily preventable and they can be completed now – NOT—in the days leading up to a snow storm. 

The single most important storage tip is removing the old gasoline. If you do nothing else, drain the gas!

High ethanol in gasoline will ruin your carburetor.

Drain the remaining fuel from your gas tank. Fuel that sits all summer will go bad and require an expensive carburetor replacement. It’s also unlikely that a carburetor replacement is covered under warranty when bad fuel is at fault! Start by draining the fuel, then:

- Use stabilizer in your fuel. Mix right at the pump with the BEST fuel available. 

- Add a small amount of the treated fuel to the snow blower, and start it up. Run the machine for a couple minutes and allow the treated fuel to run through the engine. 

- Turn the fuel shutoff knob to OFF and let the snow blower run out of gas. 

Finally, turn off the key switch. This step alone will go a long way to protecting the engine and ensure another season of use.

Completing a proper “summarization” involves a few additional steps, but there are maintenance kits available to make the job easy. Most kits will include oil, spark plugs, and fuel stabilizer. If the snow blower is stored outside, its not a bad idea to pick up a cover too!

If your snowblower needs more repair work than maintenance, stop by our site and find the parts you need here.

2015 © ProParts Direct. All Rights Reserved. Privacy Policy | Site Map Design & Development by The Scribbit The Scribbit - Marketing, Graphic Design and Web Development